This is just an ordinary Table top clock for an untrained eye, but hidden within is an HD WiFi camera and microphone which record in high-definition and offer remote access for live surveillance. Using the clock’s internal WiFi, a mobile device (Smartphone/Tablet) and a free App, you can remotely control, record and monitor the live feed from the camera. This device also boasts motion-activation, scheduled recordings and infrared LEDs for low-light recordings. Features: WiFi / Internet enabled Live Surveillance and configuration using the “LookCam” app. Video resolution: 1920 X 1080, 1280 X 720. Photo resolution: 1920 X 1080. Micro SD card slot: supports up to 64GB (not included) Battery: rechargeable, up to 2 hours, or mains power for continuous use. How to use camera: 1 Open the back panel of the table clock & Insert Battery. 2.Download “LookCam” from App Store for IOS device or from Google Play Store for android device. 3.Slide the ON/OFF button to the ON side to turn WiFi Camera ON. 4.You will see “Blue” and “Red” light blinking. 5.Now go to your phone Wi-Fi setting. Search for the new Wi-Fi signal. If new Wifi does not APPEAR IN WIFI SETTING, PLEASE RESET THE DEVICE BY PRESSING RESET BUTTON). 6.After connection is been made, go to “LookCam” app which was downloaded earlier. 7.Open the app, add the device and it will be online. 8.Click on the “Cam” to view live video feed. 9.Recording video. For recording press the record button. 10.Recording Audio for recording video with audio, Press audio record button. * In case if you forgot the password, please reset the device by pressing reset button for 5 sec, It will reset the password. TIME SET: there is no hard button on device but time can be from the Mobile App only.